Stacks Image 825
Stacks Image 1002

Rim Coating 1-2 Years

Stacks Image 864

(One bottle is enough to do 8 to 10 sets of wheel faces. ) Alpha 45 (45%Si02) is a long lasting hydrophobic rim coating, that easily retains the appearance of vehicle rims, making them considerably easier to clean and preserve. Dust and grime will not adhere to the treated rims. This reduces the effect pollution and organic contaminants have on marking and staining rims, including dust, road salt, spotting and erosion that would usually damage the rims surface. Alpha 45 lasts for years and is simple to apply. This product is suitable for all rims, and works best on painted rims. Made in the United States. Lasts 1- 2 years.

Click to expand
Stacks Image 886

Paint Coating 2 Years

Stacks Image 1012

A HYDROPHOBIC PRODUCT THAT GENERATES RESULTS (50% SIO2) (One bottle is enough to do two medium sized cars.) Vision 50 is a simple and easy way to retain the appearance of vehicles. With pioneering exterior surface protection that uses two chemical compounds, this coating produces a hard-wearing hybrid shield that yields an intense gloss and continuous protection on all vehicle exteriors. Vehicles fortified with Vision 50 display features that are essentially indistinguishable from the hard surface of the exterior where dirt normally gathers in tiny nicks and crevices, making vehicles considerably easier to clean and preserve. There are many benefits of using Vision 50. Since it is a high-quality repellant, dust and grime will not adhere to the treated exterior. This reduces the effect pollution and organic contaminants have on marking and staining vehicles, including dust, road salt, spotting and erosion that would usually damage the surface. Made in the United States. Lasts up to 2 years.

Click to expand
Stacks Image 903

Paint Coating 3 Years

Stacks Image 1016

(One bottle is enough to do two medium sized cars.) Omega 60 (60%Si02) is a sophisticated technological coating system that creates an additional layer of protection over a vehicle’s surface. Formulated by American engineers, Omega 60 is manufactured to offer superior endurance against scratches caused by abrasive detergents, and swirls that are frequently produced during conventional wash methods. Omega 60 goes above and beyond by forming a film of defense that helps a vehicle’s paint maintain its color, resist airborne contaminants, and generate a high-gloss, showroom appearance. With a unique combination of hydrophobic and hydrophobic elements, this formula repels water to create a look that is clear, smooth and clean. Omega 60 can be applied to all exterior surfaces, including cars, motorbikes, yachts and bicycles. It is 7H pencil abrasive tested, and quality-made in America. Made in the United States. Lasts up to 3 years.

Click to expand
Stacks Image 895

Paint Coating 4 Years

Stacks Image 1014

(One bottle is enough to do two medium sized cars. ) With the Serum 75 (75%Si02) Coating System, vehicles maintain their polished, showroom appearance. The formula protects against damage from the elements, including harsh UV rays, abrasion, bacteria, industrial fallout, alkaline chemicals and acid rain. Our innovative solution integrates nano-engineered structuring made in America that forms a high-quality resistant film to protect against oxidation, water spots, insects, bird droppings, tree sap and other airborne particles. The state-of-the-art technology creates a pliable, cohesive foundation that bonds with the surface being treated, and produces a thin, durable layer that withstands harsh conditions, such as extreme temperature fluctuations, that negatively affect a vehicle’s painted exterior. Made in the United States. Lasts up to 4 years.

Click to expand

With so many coating options why choose Nano1? Simply put, Nano1 makes all paint look better, even if it hasn’t been perfected.

Let’s face it, coatings are intended to make your paint look amazing for a long period of time eliminating the need to wax. Most coatings do nothing more than add gloss and make the paint bead water. Only CS-II and Nano1 coatings will actually improve the finish without requiring extensive paint correction.

Click to expand
PREP
Stacks Image 1189

Wash, Decon, Strip Wax and Sealants

It’s imperative to start with clean paint in order for the coating to bond properly. At minimum this is a wash and clay treatment. Use of iron removers and fallout removers are recommended.
CORRECT
Stacks Image 1194

Correct and Perfect!

Use the best methods to improve the paint without use of fillers. Do not use one step or All In One polishes. You want to remove flaws and defects.
It’s imperative to start with clean paint in order for the coating to bond properly. At minimum this is a wash and clay treatment. Use of iron removers and fallout removers are recommended.
PREP
Stacks Image 1201

Clean Paint

Mist and wipe silicone remover over all areas to coat. Paint will not feel slick after the final wipe and that’s good.. After correction is done, ensure the paint is completely free of oils and silicones. IPA aka isopropyl alcohol mixed with water is NOT sufficient. Our silicone remover is easy and fast to use.
COAT
Stacks Image 1208

Coat It!

Using a suede microfiber applicator or microfiber sponge applicator, apply a liberal amount of product, let sit for at least one minute, then buff off.
FInished with Nano1
Stacks Image 1214
  • Permanent Mistakes?
    In the right hands, coatings provide the best protection from the elements, but if you don’t do them everyday, mistakes can have severe consequences like the owner of this Polaris motorcycle that used this over the counter coating he bought at the discount store and the coating rejected itself….

    Fix Required Wetsanding

    The owner of this motorcycle wanted to remove a coating he applied. The manufacturer said the only way to fix it was to wet sand it off. This was a very expensive and time consuming process. Applying a coating requires knowledge to prep paint as well as improve it before applying the coating. This is why we do NOT recommend coatings if you don’t do paint corrections. This applies to vinyl and tint shops that are looking for a product to protect paint.
  • Why Can’t I Use IPA?
    IPA or isopropyl alcohol known as rubbing alcohol mixed with water has been the “standard” way by detailers to prep paint for a very long time. However it turns out its a lousy way to prep paint both in terms of effectiveness, and being gentle to the painted surfaces. It also can affect the ease of application of the coating.

    Silicone Remover Instead of IPA

    The owner of this motorcycle wanted to remove a coating he applied. The manufacturer said the only way to fix it was to wet sand it off. This was a very expensive and time consuming process. Applying a coating requires knowledge to prep paint as well as improve it before applying the coating. This is why we do NOT recommend coatings if you don’t do paint corrections. This applies to vinyl and tint shops that are looking for a product to protect paint.

Manufacturer

Since 2005
high quality coatings and detailing products to enhance the finish of your vehicles. We make your paint look deeper, richer, and more glossy than it ever has before. Our top of the line coatings are Ceramic and Titanium and both will yield super glossy protection from 3 to 5 plus years. We have specific coatings for wheels to protect against brake dust, windshield glass, plastic surfaces, convertible tops, interior leathers and fabrics. We also have an extensive line of products designed for optimal prep of the vehicles for the professional applicator of our products.
Stacks Image 1024

SEMA 2018 CS-II Premiere Las Vegas Meetup

Stacks Image 1026

SEMA 2018 CS-II Premiere Las Vegas Meetup

Made in USA

Since 2005
CS-II and Nano1 is based in Singapore and the products were designed for their harsh extreme weather, but all the products are made responsibly right here in California. CS-II USA provides support and distribution for all CS-II and Nano1 products in Anaheim Hills, California.